PANTEC MANDREL SERIES

High speed hot foil stamping modules

 

The rotary foil stamping modules ELECTROMAN™ and FLOWMAN™ are a set of either electrically or oil heated hot foil stamping mandrel and impression cylinder. ELECTROMAN™ is heated electrically and therefore no external heating equipment is required. ELECTROMAN™ is hybrid. Encapsulated oil inside distributes the heat homogenenous to the surface

.

The concept is designed for basic stamping requirements. The oil heated FLOWMAN™ works with an external oil heating unit which achieves a higher mandrel temperature, allows stamping of more demanding hot foil designs.

Benefit with Pantec MANDREL series

Fast running due to high preload

The impression cylinder and the tool mandrel are equipped with bearers. The high preload between the cylinders is induced directly to the bearers, granting smooth and fast running.


Sophisticated adjustments

The stamping pressure is set by adjusting the gap between impression- and tool cylinder independently from the preload. The tool cylinder is laterally movable to register perfectly to the preprint.


Clean handling

For an extremely fast job change, an externally pre-heated mandrel is exchanged with the last job’s mandrel. Changing the tool is very simple. Exact positioning is done tool-free. On top, of course, temperature control is set digitally and current temperature is displayed to the user.  

MANDREL series - product overview

ELECTROMAN™ series

Product name
Foil width / stamping width, max.
Max. set temperature
Mandrel types (Diameter / format length)
ELECTROMAN™ 410
430 / 410 mm
220° C

D85 (12" .. 18 1/8")

D135 (18 1/4" .. 24")

ELECTROMAN™ 330
350 / 330 mm
220° C

D62 (9" .. 14")

D85 (12" .. 18 1/8")

D135 (18 1/4" .. 24")

FLOWMAN™ series

Product name
Foil width / stamping width, max.
Max. temperature
Mandrel types (Diameter / format length)
FLOWMAN™ 510
530 / 510 mm
250° C

D85 (12" .. 18 1/8")

D135 (18 1/4" .. 24")

FLOWMAN™ 410
430 / 410 mm
250° C

D85 (12" .. 18 1/8")

D135 (18 1/4" .. 24")

FLOWMAN™ 330
350 / 330 mm
250° C

D85 (12" .. 18 1/8")

D135 (18 1/4" .. 24")